Home

ZBX-740
SKU: ZBX-740

ZBX-740 STEPPER MOTOR CONTOL MODULE

The ZBX-740 is an intelligent SBX module for single-axis stepper motor control with full and half-step modes. Programmable stored command sequences control the motor independently from the host CPU. The step-rate, number of steps, accel/decel, direction are all available to the host program control. Step rates from 1 every 12 seconds up to 5,000 steps per second. External switch inputs for: 2 deceleration limits, 2 maximum limits, 1 home position, and 1 user definable input.

  • INTELLIGENT CONTROLLER
  • INDEPENDENT OPERATION
  • INTERRUPT/STATUS CAPABILITY
  • LARGE STEP-RATE RANGE
  • OPTO-ISOLATED OUTPUTS
  • SIX EXTERNAL LIMIT SWITCH INPUTS
  • PROGRAMMABLE ACCELERATION and DECELERATION CONTROL
  • iSBX COMPATIBLE

TECHNICAL SPECIFICATIONS

Compatibility
SBX Bus
Pulse Direction Translators
Phase Sequence Power Drives

Card Dimensions
2.85" x 3.7" x 0.75" 

Operating Range
0 degrees C to 60 degrees C

Voltage Requirements
+5v +/- 5% @ 1.0A (typical)

Connectors
Two 10-pin ribbon connectors